Mouse over the image to zoom and use the wheel to adjust the zoom level
PLAFOMETAL-CC-410

Ceiling installed on exposed edge profile with PM2, PM3, PM4, PM10, PM12 panels

Ideal for :

Standard horizontal circulationsPLAFOMETAL-CC-410 is a system that can be adapted to the dimensions of corridors. PM panels are self-supporting from wall to wall, avoiding the use of suspended structures in cluttered plenums with numerous distribution networks. They are directly installed on exposed wall angles, making it a standard and easy-to-install solution. Their robustness combined with a large access opening will facilitate maintenance phases throughout the building's life.

Selection guide

  • Acoustic comfort

The advantages of the system

  • Installation: simple and fast system, cost-effective and durable solution
  • Acoustic: high correction, absorption coefficient αw up to 1 (NRC = 1)
  • Opening: easily removable with reduced demounting on hollow joint angle
  • Aesthetic: finishes of panels with flush or hollow edges, sharp or chamfered angles

Description


  • Self-supporting ceiling made up of panels laid on an exposed edge profile
  • Self-supporting steel panels with flush or recessed joints, sharp or chamfered angles
  • Depending on the model, the panels have open-ended extremities (OE) that can be easily trimmed during installation to fit the wall-to-wall distance. They can also be provided trimmed to length with straight raised ends (SRE) for improved lateral rigidity and finishing on the edge
  • The edge profile is an L-shaped angle or a recessed joint angle (W) that effectively conceals wall irregularities while reducing the panel's height drop into often crowded plenums
  • Optional acoustic enhancements

Bulk cut

Dimensions in mm.

Downloadable documents

Choose the documents you want to download

Appearance

  • Perforations

    Percentage of void, shape in mm, and hole arrangement

    • On steel: Non-Perforated, 11% Ø1.5 M, 22% Ø1.5 M, 10% Ø2.5 M, 12% Ø2.5 U, 16% Ø2.5 U, 23% Ø2.5 M, 20% 61x4 U*, 40% 61x4 U*, 18% ØIRR ; Other perforations on request
    • On pre-coated aluminum (except PM12 panel): Non-Perforated, 11% Ø1.5 M, 10% Ø2.5 M, 12% Ø2.5 U, 23% Ø2.5 M
    • On anodized aluminum (except PM12 panel): Non-Perforated, 11% Ø1.5 M
    • On stainless steel (except PM10 and PM12 panels): Non-Perforated, 10% Ø2.5 M, 16% Ø2.5 U

    *Except for PM10 and PM12

    Perforation range:

    Refer to the "Perforations" paragraph on the "Metal Ceiling Finishes" page for more details.

    11% Ø1.5 M
    11% Ø1.5 M
    Void rate: 11%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    11% Ø1.5 M
    11% Ø1.5 M
    Void rate: 11%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    22% Ø1.5 M
    22% Ø1.5 M
    Void rate: 22%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    10% Ø2.5 M
    10% Ø2.5 M
    Void rate: 10%
    Hole shape: Round Ø2.5
    Hole arrangement: M
    12% Ø2.5 U
    12% Ø2.5 U
    Void rate: 12%
    Hole shape: Round Ø2.5
    Hole arrangement: U
    16% Ø2.5 U
    16% Ø2.5 U
    Void rate: 16%
    Hole shape: Round Ø2.5
    Hole layout: U
    23% Ø2.5 M
    23% Ø2.5 M
    Void rate: 23%
    Hole shape: Round Ø2.5
    Hole layout: M
    20% 61x4 U
    20% 61x4 U
    Void rate: 20%
    Hole shape: Rectangle 61x4
    Hole arrangement: U
    40% 61x4 U
    40% 61x4 U
    Void rate: 40%
    Hole shape: Rectangle 61x4
    Hole arrangement: U
    18% IRR
    18% IRR
    Void rate: 18%
    Hole shape: Round Ø4 and 6.4
    Hole layout: Irregular

  • Colors

    Precoated polyester steel

    • White 137 (≈ RAL 9003)
    • Metallic Grey (RAL 9006)

    Post-coated polyester powder steel

    • White RAL 9003
    • White RAL 9010
    • White RAL 9016
    • 180 RAL shades - on request

    Available upon request and quantity

    • Wood-look pre-coated polyester aluminum (except PM12 panel)
    • High-gloss aluminum - Anodized (except PM12 panel)
    • Bright or brushed annealed stainless steel (except PM10 and PM12 panels)

    Refer to the paragraph Materials and coatings on the "Metal ceiling finishes" page for more details.

    Pre-coated <br>White 137
    Pre-coated White 137
    Material: Steel
    Coating: 25 µm Polyester precoating
    Color: White 137 (≈ RAL 9003)
    Gloss: 15 UB ±5
    Pre-coated <br>White 137
    Pre-coated
    White 137
    Material: Steel
    Coating: 25 µm Polyester precoating
    Color: White 137 (≈ RAL 9003)
    Gloss: 15 UB ±5
    Precoated <br>Grey 9006
    Precoated
    Grey 9006
    Material: Steel
    Coating: Precoated polyester 25 µm
    Color: Metallic Grey RAL 9006
    Gloss: 30 UB ±5
    Post-laquered <br>White 9003
    Post-laquered
    White 9003
    Material: Steel
    Coating: Polyester powder post-painted 80 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Postlacquered <br>White 9010
    Postlacquered
    White 9010
    Material: Steel
    Coating: 80 μm Polyester Powder Coated
    Color: White RAL 9010
    Gloss: 30 UB ±5
    Post-painted <br>White 9016
    Post-painted
    White 9016
    Material: Steel
    Coating: Post-painted polyester powder 80 µm
    Color: White RAL 9016
    Gloss: 30 UB ±5
    Post-painted <br>180 RAL colors
    Post-painted
    180 RAL colors
    Material: Steel
    Coating: Powder-coated polyester post-painted 80 µm
    Color: 180 RAL colors
    Gloss level: 30 to 80 UB ±5
    Pre-painted <br>Natural Oak
    Pre-painted
    Natural Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 μm
    Appearance: Natural Oak
    (wood imitation F04500)
    Pre-painted <br>Golden Oak
    Pre-painted
    Golden Oak
    Material: Aluminum
    Coating: 27 µm Pre-painted polyester
    Finish: Golden Oak
    (wood imitation F03030)
    Pre-painted <br>Ashen Oak
    Pre-painted
    Ashen Oak
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Appearance: Ash Oak
    (wood imitation F03420)
    Pre-painted <br>Whitened Oak
    Pre-painted
    Whitened Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Bleached oak
    (wood imitation F02340)
    Prepainted <br>Dark Oak
    Prepainted
    Dark Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark Oak
    (wood imitation F05090)
    Precoated <br>Honey Oak
    Precoated
    Honey Oak
    Material: Aluminium
    Coating: Precoated polyester 27 µm
    Appearance: Honey oak
    (wood imitation F03330)
    Prélaqué <br>Teck doré
    Prélaqué
    Teck doré
    Matière : Aluminium
    Revêtement : Prélaqué polyester 27 µm
    Aspect : Teck doré
    (imitation bois F04670)
    Pre-painted <br> Mahogany
    Pre-painted
    Mahogany
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Mahogany
    (wood imitation F05630)
    Pre-painted <br>Cherry Wood
    Pre-painted
    Cherry Wood
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Cherry
    (wood imitation F03150)
    Pre-painted <br> Dark Cherry Wood
    Pre-painted
    Dark Cherry Wood
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Dark cherry
    (wood imitation F02010)
    Pre-painted <br>Dark walnut
    Pre-painted
    Dark walnut
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark walnut
    (wood imitation F05680)
    Pre-painted <br>Dark Wenge
    Pre-painted
    Dark Wenge
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Wenge
    (wood imitation F04660)
    Precoated <br>Dark Ebony
    Precoated
    Dark Ebony
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Ebony
    (wood imitation F04220)
    Anodized <br>High Gloss
    Anodized
    High Gloss
    Material: Aluminum
    Treatment: Anodized
    Finish: High gloss
    (mirror finish)
    Stainless Steel <br>Bright Annealed
    Stainless Steel
    Bright Annealed
    Material: Stainless Steel
    Finish: Bright Annealed
    (mirror finish)
    Stainless Steel <br>Brushed
    Stainless Steel
    Brushed
    Material: Stainless Steel
    Finish: Brushed
    Copper <br>Tecu patina
    Copper
    Tecu patina
    Material: Copper
    Finish: Pre-patinated
    (Tecu® patina)

Performance

  • Light reflection

    Up to 87%

  • Indoor air quality

    Class A+ for all products:- Non-perforated- From the ALPHA range- From the ALPHA PLUS range, with specific encapsulated insulationClass A for all products from the ALPHA PLUS range, with specific surfaced insulation

  • Sound absorption

    According to standard EN ISO 11 654

    • αw up to 0.85 (NRC = 0.85) with the ALPHA range
    • αw up to 1 (NRC = 1) with the ALPHA PLUS range

      • Performance acoustics are subject to the chosen perforation. Refer to the table in the brochure Acoustic metal ceilings.

  • Acoustic complement

    • Offer ALPHA: Plafometal acoustic veil
    • Offer ALPHA PLUS: Specific acoustic insulation surfaced with a veil or bagged in a PE film

    Refer to the Acoustic page in the Product Catalog Annex for more details.

  • Corrosion resistance

    Indoor Ceiling

    • Class B according to standard EN 13964
    • Suspensions and fixings to supports must be selected according to the desired class

    Refer to the Implementation page in the Products Catalog Annexes for more details.

  • Cleanability

    By nature, our metal ceilings require minimal maintenance. However, various types of cleaning are still possible.

    • Refer to the page Maintenance in the Product Catalog Annex for more details, including advanced high-pressure and dry steam cleanings.
    • For perforated stainless steel ceilings, a specific cleaning should be carried out on-site after film removal. Refer to the "Protective Film" paragraph on the Installation page in the Product Catalog Annex for further details.

  • Air permeability

    Air leakage rate in overpressure and underpressure according to standard EN ISO 9972: 2015PLAFOMETAL-SC-410 system with non-perforated PM12 panel

    • Q +/- 15 Pa ≈ 9 l/m2/s
    • Q +/- 30 Pa ≈ 14 l/m2/s
    • Q +/- 45 Pa ≈ 17 l/m2/s

      • PLAFOMETAL-SC-410 system with non-perforated PM12 panel, with the application of a silicone type joint in the interlocking flange of the panels and at the level of the peripheral angles

    • Q +/- 15 Pa ≈ 0.06 l/m2/s
    • Q +/- 30 Pa ≈ 0.10 l/m2/s
    • Q +/- 45 Pa ≈ 0.14 l/m2/s

      • PLAFOMETAL-SC-410 system with non-perforated PM12 panel, with the application of a silicone type joint in the bevel of the panels and at the level of the peripheral angles

    • Q +/- 15 Pa ≈ 0.004 l/m2/s
    • Q +/- 30 Pa ≈ 0.006 l/m2/s
    • Q +/- 45 Pa ≈ 0.009 l/m2/s

  • Reservations, integrations

    Custom factory cutting on request (except for PM10 and PM12: on-site cutting)

  • Opening

    Access to the plenum by lifting the panel in the grid.

  • Resistance to disinfection chemicals

    Our metal ceilings are resistant to 2.5% sodium hypochlorite, 6% hydrogen peroxide, or 70% ethanol disinfectants (according to EN 12720 and ISO 11998 standards).Refer to the Maintenance page in the Products Catalog Annex for more details.

  • FDES Plafometal verified

    Verified environmental and health declaration sheet available on the INIES database (www.inies.fr) and directly accessible on our website at this link

  • Reaction to fire

    Euroclass A1 for the products:- Non-perforated pre-painted- Pre-painted from the ALPHA rangeEuroclass A2-s1, d0 for the products:- Non-perforated powder-coated post-painted- Powder-coated post-painted from the ALPHA range- From the ALPHA PLUS range

Technical properties

General presentation of the system family

Family : Plafonds autoportants pour les circulations

Ideal for office corridors, hospitals, and more...

Acoustic:

  • Acoustic comfort with an absorption index αw up to 1.00 (NRC = 1.00)

Aesthetic:

  • Adaptable to corridor widths
  • Various finishes with hidden joints depending on the systems
  • Possibility of integrating equipment
  • Customized recesses and light troughs

Practical:

  • Self-supporting from wall to wall, avoiding suspended grids in crowded plenums
  • Easy installation and opening
  • Wide access to the plenum
  • Robustness during handling

Sub-family : Plafond posé sur profils de rives apparents

Ceiling on exposed profiles Systems with self-supporting PM2, PM3, PM4, PM8, PM10, PM12 panels

  • Panels easily overlapping in length on angles: easy and fast installation
  • Reduced disrobing in the plenum on hollow joint angles
  • Aesthetic finishes of panels: seamless edges or hollow joints, sharp corners or chamfered
  • Fire-Resistant Version (SF) for High Rise Buildings

The products making up this system

PM10

Self-supporting panel, straight sides and bevelled edges

Discover

PM12

Self-supporting panel with socketed sides and bevelled edges

Discover

PM2

Self-supporting panel, straight sides and square edges

Discover

PM3

Self-supporting panel with overlapping sides and square edges

Discover

PM4

Self-supporting panel, square edges, forming a closed hollow joint

Discover