Mouse over the image to zoom and use the wheel to adjust the zoom level

Use the wheel to adjust the zoom level or click to open the expanded view

PLAFOMETAL-EM-110

Swing-down MESH ceiling on concealed profiles with D92s and D92t panels

Ideal for :

Office and hospital corridors

PLAFOMETAL-EM-110 is a system adjustable to the dimensions of corridors. The D92s and D92t expanded metal panels are self-supporting from wall to wall, avoiding the need for suspended grids in crowded plenums with numerous distribution networks. They create an elegant reveal joint with the wall. Their durability, combined with a wide opening by tilting on both sides, will facilitate maintenance phases throughout the building's lifespan.

Selection guide

Acoustic comfort
Active fire protection

The advantages of the system

Aesthetics: panels on concealed framework with offset edge featuring a hollow joint to absorb alignment deviations with the wall for a straight finish
Opening: swing-down from below, ideal for crowded plenums, and robust in handling
Plenum ventilation: suitable for hospital environments
Acoustic: high correction, absorption coefficient αw up to 1 (NRC = 1)

Description

Self-supporting ceiling made of expanded metal panels hung on a concealed profile creating a closed gap joint between the panel ends and the wall
Self-supporting steel panels with seamless edges
The panels have raised inner hook ends (BRIC) allowing them to be suspended on the framework and tipped. This provides the panel with robustness for handling
The edge profile consists of a reprise ledge to be fixed to the wall and a hooking profile to be offset and fixed under the wing of the ledge according to the length of the panels between notches. It allows the closed gap joint thus formed to absorb alignment deviations with the wall
Optional acoustic enhancements

Bulk cut

A gap A is required between the panel and the wall. Dimensions in mm.

Appearance

Expanded mesh
Dimensions
- Mesh: Geometry WL x WD - LG x Th
- Panel: width in the WL direction of the mesh, length in the WD direction
Installation
- The direction of light entry through the mesh depends on its laying direction, visually recognizable by its inclination.
- Depending on the desired visual effect, the panels can be installed in the same direction or alternating every two.
*Aluminum is possible, please contact us.
KD100 Q6x4.5-1.2x1
Geometry: Square (Q)
Long Diagonal (LD): 6 mm
Short Diagonal (SD): 4.5 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 1.5 mm
Steel*: 4.2 kg/m²
Front Open Area / max: ≈ 36% / 40%

KD100
Q6x4.5-1.2x1
Geometry: Square (Q)
Long Diagonal (LD): 6 mm
Short Diagonal (SD): 4.5 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 1.5 mm
Steel*: 4.2 kg/m²
Front Open Area / max: ≈ 36% / 40%

KD200
Q8x6-1.2x1
Geometry: Square (Q)
Long Diagonal (LD): 8 mm
Short Diagonal (SD): 6 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 2 mm
Steel*: 3.2 kg/m²
Frontal Void / max: ≈ 54% / 56%

KD300
Q10x7-1.5x1
Geometry: Square (Q)
Diagonal Long (DL): 10 mm
Short Diagonal (DC): 7 mm
Metal Strip Width (Lg): 1.5 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 2.5 mm
Steel*: 3.2 kg/m²
Frontal Void / max: ≈ 57% / 66%

KD400
Q16x11-3x1
Geometry: Square (Q)
Long Diagonal (DL): 16 mm
Short Diagonal (DC): 11 mm
Metal Strip Width (Lg): 3 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 4 mm
Steel*: 4.3 kg/m²
Frontal Void / Max: ≈ 46% / 59%

RB15
R10x5.8-1.5x1
Geometry: R (Diamond)
Long Diagonal (LD): 10 mm
Short Diagonal (SD): 5.8 mm
Metal Strip Width (W): 1.5 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 2 mm
Steel*: 4.1 kg/m²
Frontal Void / max: ≈ 45% / 57%

RB25
R16x8-2x1
Geometry: R (Diamond)
Long Diagonal (DL): 16 mm
Short Diagonal (DC): 8 mm
Metal Strip Width (Lg): 2 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 3 mm
Steel*: 4 kg/m²
Front Open Area / max: ≈ 52% / 65%

RB35
R28x10-2x1.5
Geometry: R (Diamond)
Long Diagonal (DL): 28 mm
Short Diagonal (DC): 10 mm
Metal web width (Lg): 2 mm
Metal thickness (Ep): 1.5 mm
Total thickness (EpT): ≈ 3.5 mm
Steel*: 4.8 kg/m²
Frontal void / max: ≈ 55% / 70%
Compatible with active fire protection

RB45
R28x14-5x0.6
Geometry: R (Rhombus)
Diagonal Long (DL): 28 mm
Short Diagonal (DC): 14 mm
Metal strip width (Lg): 5 mm
Metal thickness (Ep): 0.6 mm
Total thickness (EpT): ≈ 7 mm
Steel*: 3.35 kg/m²
Front gap / max: ≈ 33% / 50%

RB55
R43x13-2.5x1.5
Geometry: R (Rhombus)
Long Diagonal (LD): 43 mm
Short Diagonal (SD): 13 mm
Metal Strip Width (SW): 2.5 mm
Metal Thickness (MT): 1.5 mm
Total Thickness (TT): ≈ 4 mm
Steel*: 4.4 kg/m²
Frontal Void / Max: ≈ 67% / 77%
Compatible with active fire protection

RB55 XL
R43x20-2.2x1.5
Geometry: R (Diamond)
Long Diagonal (DL): 43 mm
Short Diagonal (DC): 20 mm
Metal Flange Width (Lg): 2.2 mm
Metal Thickness (Ep): 1.5 mm
Total Thickness (EpT): ≈ 4.5 mm
Steel*: 2.60 kg/m²
Frontal Void Area / max: ≈ 79% / 84%
Compatible with active fire protection

RB65
R62x23-8x0.6
Geometry: R (Diamond)
Long Diagonal (LD): 62 mm
Short Diagonal (SD): 23 mm
Metal Strip Width (MSW): 8 mm
Metal Thickness (MT): 0.6 mm
Total Thickness (TT): ≈ 10 mm
Steel*: 3.4 kg/m²
Frontal Void / max: ≈ 36% / 60%

RB75
R85x35-11x1
Geometry: R (Diamond)
Long Diagonal (DL): 85 mm
Short Diagonal (DC): 35 mm
Metal Strip Width (Lg): 11 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 14 mm
Steel*: 5.10 kg/m²
Frontal Void / max: ≈ 48% / 70%
Compatible with active fire protection
3D Mesh Viewer
Colors
Post-painted steel with polyester powder
- White RAL 9003
- White RAL 9010
- White RAL 9016
- Metallic Grey RAL 9006
- Black RAL 9005
- 180 RAL colors
Post-laquered White 9003
Material: Steel
Coating: Polyester powder post-painted 80 µm
Color: White RAL 9003
Gloss: 30 UB ±5

Post-laquered
White 9003
Material: Steel
Coating: Polyester powder post-painted 80 µm
Color: White RAL 9003
Gloss: 30 UB ±5

Postlacquered
White 9010
Material: Steel
Coating: 80 μm Polyester Powder Coated
Color: White RAL 9010
Gloss: 30 UB ±5

Post-painted
White 9016
Material: Steel
Coating: Post-painted polyester powder 80 µm
Color: White RAL 9016
Gloss: 30 UB ±5

Post-painted
Gray 9006
Material: Steel
Coating: Powder polyester post-painted 80 µm
Color: Metallic Grey RAL 9006
Gloss: 30 UB ±5

Pre-painted
Black 9005
Material: Steel
Finish: Powder-coated polyester 80 µm
Color: Black RAL 9005
Gloss: 30 UB ±5

Post-painted
180 RAL colors
Material: Steel
Coating: Powder-coated polyester post-painted 80 µm
Color: 180 RAL colors
Gloss level: 30 to 80 UB ±5
3D Mesh Viewer

Performance

Indoor air quality
Class A+ for all products:
- Unfilled
- From the ALPHA PLUS range, with specific bagged insulation
Class A for all products from the ALPHA PLUS range, with specific surfaced insulation.
Sound absorption
According to standard EN ISO 11654
- αw up to 1 (NRC = 1) with the ALPHA PLUS range
Refer to the table in the Metal Acoustic Ceilings brochure.
Acoustic complement
ALPHA PLUS offer: specific acoustic insulation with a surface veil or encapsulated in a PE film
Refer to the Acoustic page in the Product Catalog appendices for more details.
Corrosion resistance
Ceiling indoors
- Class B for standard steel frameworks according to the EN 13964 standard
- Corrosion resistance C1 according to EN 12944 for standard steel MESH panels (not covered by EN 13964)
- Corrosion resistance 2a according to EN 13096 for aluminum MESH panels (not covered by EN 13964)
- Suspensions and fixings to the supports should be selected according to the desired class
Cleanability
By nature, our metal ceilings require minimal maintenance. However, various types of cleaning are still possible. Please refer to the Maintenance page in the Product Catalog annexes for more details.
Reservations, integrations
Customized factory cut on request.
Opening
Access to the plenum by vertically pushing the panel then laterally sliding to escape the hooking profile. The panel swings down and remains suspended on the opposite profile.
Resistance to disinfection chemicals
Our metal ceilings are resistant to sodium hypochlorite 2.5%, hydrogen peroxide 6%, or ethanol 70% disinfectants (according to EN 12720 and ISO 11998 standards).Refer to the page Maintenance in the Product Catalog annexes for more details.
Active fire protection
According to the EN 12845 standard
- If sprinklers are installed above the open cell ceiling panel, the total open flat surface area, including lighting fixtures, must not be less than 70% of the flat surface
- In practice, a void percentage greater than 80% is commonly requested for panel elements
Ceiling void percentage
- Over 70%: RB35, RB55, RB55 XL, RB75
- Over 80%: RB55 XL
Reaction to fire
A2-s1, d0

General presentation of the system family

Family : Plafonds en métal déployé MESH

Ideal for tertiary buildings, hospitals, airports, parking areas...

Aesthetics:

Wide selection of meshes for different visual effects with natural or artificial light coming from the plenum
Depending on the installation and observation direction, the metal appears more or less open
Ideal solution for dividing technical areas with elegance
Various finishes with shadow joint according to the systems

Acoustic:

Possibility of absorption coefficient αw up to 1.00 (NRC = 1.00)

Practical:

Easy installation and opening
Robustness during handling
Allows active fire protection systems to operate through the ceiling

Sub-family : Plafond MESH autoportant pour circulations

MESH systems opening on concealed profiles

Adaptable to corridor width
Various finishes with open joints depending on the systems
Self-supporting from wall to wall avoiding suspended structures in crowded plenums
Wide plenum access
Natural ventilation of the plenum (if panel not filled with mineral wool)