MESH ceiling hung on concealed grid with D92s and D92t panels
Entrance halls and media libraries
PLAFOMETAL-EM-210 is a system with a strong aesthetic appeal. The D92s and D92t expanded metal panels are self-supporting between carriers, and the wide hollow joint left around the perimeter gives the ceiling an airy design. Their robustness, combined with a large opening from below without the need to undress them in the plenum, will facilitate maintenance phases throughout the life of the building.
Selection guide
- Acoustic comfort
- Active fire protection
The advantages of the system
- Aesthetic: panels with a pronounced appearance due to wide hollow joints
- Dimension: choice of different panel widths and lengths
- Access: easily removable from below with wide access to the plenum
- Acoustic: high correction, absorption coefficient αw up to 1 (NRC = 1)
Description
- Wall to wall suspended ceiling made of expanded metal panels suspended on carriers forming a large concealed joint
- Self-supporting steel panels
- The panels are equipped with an interior hook-up at their ends allowing them to be suspended on the structure
- The carriers are made of steel
- Optional acoustic additions
Bulk cut
Dimensions in mm.
Appearance
-
Expanded mesh
Dimensions
- Mesh: Geometry WL x WD - LG x Th
- Panel: width in the WL direction of the mesh, length in the WD direction
Installation
- The direction of light entry through the mesh depends on its installation direction, visually recognizable by its inclination.
- Depending on the desired visual effect, panels can be installed in the same direction or every other panel can be reversed.
*Aluminum option available, please contact us.
KD100 Q6x4.5-1.2x1Geometry: Square (Q)
Long Diagonal (LD): 6 mm
Short Diagonal (SD): 4.5 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 1.5 mm
Steel*: 4.2 kg/m²
Front Open Area / max: ≈ 36% / 40%
KD100
Q6x4.5-1.2x1Geometry: Square (Q)
Long Diagonal (LD): 6 mm
Short Diagonal (SD): 4.5 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 1.5 mm
Steel*: 4.2 kg/m²
Front Open Area / max: ≈ 36% / 40%
KD200
Q8x6-1.2x1Geometry: Square (Q)
Long Diagonal (LD): 8 mm
Short Diagonal (SD): 6 mm
Metal Strip Width (W): 1.2 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 2 mm
Steel*: 3.2 kg/m²
Frontal Void / max: ≈ 54% / 56%
KD300
Q10x7-1.5x1Geometry: Square (Q)
Diagonal Long (DL): 10 mm
Short Diagonal (DC): 7 mm
Metal Strip Width (Lg): 1.5 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 2.5 mm
Steel*: 3.2 kg/m²
Frontal Void / max: ≈ 57% / 66%
KD400
Q16x11-3x1Geometry: Square (Q)
Long Diagonal (DL): 16 mm
Short Diagonal (DC): 11 mm
Metal Strip Width (Lg): 3 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 4 mm
Steel*: 4.3 kg/m²
Frontal Void / Max: ≈ 46% / 59%
RB15
R10x5.8-1.5x1Geometry: R (Diamond)
Long Diagonal (LD): 10 mm
Short Diagonal (SD): 5.8 mm
Metal Strip Width (W): 1.5 mm
Metal Thickness (T): 1 mm
Total Thickness (TT): ≈ 2 mm
Steel*: 4.1 kg/m²
Frontal Void / max: ≈ 45% / 57%
RB25
R16x8-2x1Geometry: R (Diamond)
Long Diagonal (DL): 16 mm
Short Diagonal (DC): 8 mm
Metal Strip Width (Lg): 2 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 3 mm
Steel*: 4 kg/m²
Front Open Area / max: ≈ 52% / 65%
RB35
R28x10-2x1.5Geometry: R (Diamond)
Long Diagonal (DL): 28 mm
Short Diagonal (DC): 10 mm
Metal web width (Lg): 2 mm
Metal thickness (Ep): 1.5 mm
Total thickness (EpT): ≈ 3.5 mm
Steel*: 4.8 kg/m²
Frontal void / max: ≈ 55% / 70%
Compatible with active fire protection
RB45
R28x14-5x0.6Geometry: R (Rhombus)
Diagonal Long (DL): 28 mm
Short Diagonal (DC): 14 mm
Metal strip width (Lg): 5 mm
Metal thickness (Ep): 0.6 mm
Total thickness (EpT): ≈ 7 mm
Steel*: 3.35 kg/m²
Front gap / max: ≈ 33% / 50%
RB55
R43x13-2.5x1.5Geometry: R (Rhombus)
Long Diagonal (LD): 43 mm
Short Diagonal (SD): 13 mm
Metal Strip Width (SW): 2.5 mm
Metal Thickness (MT): 1.5 mm
Total Thickness (TT): ≈ 4 mm
Steel*: 4.4 kg/m²
Frontal Void / Max: ≈ 67% / 77%
Compatible with active fire protection
RB55 XL
R43x20-2.2x1.5Geometry: R (Diamond)
Long Diagonal (DL): 43 mm
Short Diagonal (DC): 20 mm
Metal Flange Width (Lg): 2.2 mm
Metal Thickness (Ep): 1.5 mm
Total Thickness (EpT): ≈ 4.5 mm
Steel*: 2.60 kg/m²
Frontal Void Area / max: ≈ 79% / 84%
Compatible with active fire protection
RB65
R62x23-8x0.6Geometry: R (Diamond)
Long Diagonal (LD): 62 mm
Short Diagonal (SD): 23 mm
Metal Strip Width (MSW): 8 mm
Metal Thickness (MT): 0.6 mm
Total Thickness (TT): ≈ 10 mm
Steel*: 3.4 kg/m²
Frontal Void / max: ≈ 36% / 60%
RB75
R85x35-11x1Geometry: R (Diamond)
Long Diagonal (DL): 85 mm
Short Diagonal (DC): 35 mm
Metal Strip Width (Lg): 11 mm
Metal Thickness (Ep): 1 mm
Total Thickness (EpT): ≈ 14 mm
Steel*: 5.10 kg/m²
Frontal Void / max: ≈ 48% / 70%
Compatible with active fire protection3D Mesh Viewer -
Colors
Post-painted steel with polyester powder
- White RAL 9003
- White RAL 9010
- White RAL 9016
- Metallic Grey RAL 9006
- Black RAL 9005
- 180 RAL colors
Post-laquered White 9003Material: Steel
Coating: Polyester powder post-painted 80 µm
Color: White RAL 9003
Gloss: 30 UB ±5
Post-laquered
White 9003Material: Steel
Coating: Polyester powder post-painted 80 µm
Color: White RAL 9003
Gloss: 30 UB ±5
Postlacquered
White 9010Material: Steel
Coating: 80 μm Polyester Powder Coated
Color: White RAL 9010
Gloss: 30 UB ±5
Post-painted
White 9016Material: Steel
Coating: Post-painted polyester powder 80 µm
Color: White RAL 9016
Gloss: 30 UB ±5
Post-painted
Gray 9006Material: Steel
Coating: Powder polyester post-painted 80 µm
Color: Metallic Grey RAL 9006
Gloss: 30 UB ±5
Pre-painted
Black 9005Material: Steel
Finish: Powder-coated polyester 80 µm
Color: Black RAL 9005
Gloss: 30 UB ±5
Post-painted
180 RAL colorsMaterial: Steel
Coating: Powder-coated polyester post-painted 80 µm
Color: 180 RAL colors
Gloss level: 30 to 80 UB ±5
Performance
-
Indoor air quality
Class A+ for all products:
- Unfilled
- From the ALPHA PLUS range, with specific encapsulated insulation
Class A for all products from the ALPHA PLUS range, with specific surfaced insulation
-
Sound absorption
According to standard EN ISO 11 654
- αw up to 1 (NRC = 1) with the ALPHA PLUS range
Refer to the table in the Acoustic Metal Ceilings brochure.
-
Acoustic complement
ALPHA PLUS offer: specific acoustic insulation surfaced with a veil or bagged in a PE film.
Refer to the Acoustic page in the Product Catalog appendices for more details. -
Corrosion resistance
Ceiling indoors
- Class B according to standard EN 13964 for Steel frameworks
- Comparable to Class A according to standard EN 13964 for Steel MESH panels (MESH not covered by this standard)
- Comparable to Class C according to standard EN 13964 for aluminum MESH panels (MESH not covered by this standard)
Suspensions and fixings to supports are to be selected according to the desired class
Refer to the page Implementation in the Product Catalog's annexes for more details. -
Cleanability
By nature, our metal ceilings require minimal maintenance. However, various types of cleaning are possible. Refer to the Maintenance page in the Product Catalog appendices for more details.
-
Reservations, integrations
Customized factory cutting on demand.
-
Opening
Access to the plenum by vertical push and then lateral translation to escape the hanging carrier. Clearance from below by tilting it to one side.
-
Resistance to disinfection chemicals
Our metal ceilings are resistant to 2.5% sodium hypochlorite, 6% hydrogen peroxide, or 70% ethanol disinfectants (according to EN 12720 and ISO 11998 standards).
Refer to the Maintenance page in the Product Catalog annex for more details. -
Active fire protection
According to standard EN 12845
- If sprinklers are installed above the open cell suspended panel, the total open plane surface area, including lighting fixtures, must not be less than 70% of the plane surface
- In practice, a void percentage greater than 80% is commonly requested for panel elements
- Greater than 70%: RB35, RB55, RB55 XL, RB75
- Greater than 80%: RB55 XL
Ceiling void percentage
-
Reaction to fire
A2-s1, d0
General presentation of the system family
Family : Plafonds en métal déployé MESH
Ideal for tertiary buildings, hospitals, airports, parking areas...
Aesthetics:
- Wide range of meshes for different optical effects with natural or artificial light coming from the plenum
- Depending on the installation direction and observation angle, the metal appears more or less open
- Ideal solution for elegantly delimiting technical areas
- Various finishes with shadow joints depending on the systems
Acoustic:- Possibility of absorption αw up to 1.00 (NRC = 1.00)Practical:
- Easy installation and opening
- Robustness during handling
- Allows active fire protection networks to operate through the ceiling
Sub-family : Plafond MESH suspendu
Suspended MESH systems
- Adaptable to building halls, galleries, and landings
- Wide variety of aesthetic options like hollow joints, colored meshes...
- Extensive range on concealed grids, T grids, lockable (outdoor, sports hall)...
- Easy installation and access
