Mouse over the image to zoom and use the wheel to adjust the zoom level

Use the wheel to adjust the zoom level or click to open the expanded view

PLAFOMETAL-SC-230

Ceiling clipped on concealed grid with Monobac tile

Ideal for :

In halls, offices, and premises where hygiene is important, as well as outdoor canopies.PLAFOMETAL-SC-230 is a system suitable for discreet and uniform ceiling surfaces. Monobac tiles are clipped between concealed carriers. The ceiling, in its non-perforated versions, has good airflow for areas where hygiene is crucial. Access to the plenum is done through a specific tool to limit access to equipment, with a large opening from below to facilitate maintenance phases throughout the building's lifespan. This system can also be made tamper-proof and implemented outdoors.

Selection guide

Acoustic comfort
Outdoor installation

The advantages of the system

Aesthetics: ceiling with a discreet and uniform appearance
Hygiene: good water, air, and particle permeability that can be enhanced by implementing a joint between panels
Acoustic: high sound correction, absorption coefficient αw up to 1 (NRC = 1)
Access: demountable from below for plenum access using a specific tool
Safety: possibility to secure plenum access
Installation: suitable for outdoor installation

Description

Wall to wall closed suspended ceiling made of clipped panels on concealed carriers
Steel or aluminum Clip-In type panel with seamless edges and chamfered angles (possible with sharp edges) with a strip on all 4 sides allowing clipping even in case of cuts
Standard installation: the secondary T carrier, where the panel clips, is connected to a primary U carrier by a very simple to install link hanger, allowing easy adjustment of spacings between carriers.
Two alternative installation options: secondary T connected to the primary U by a steel wire bracket; secondary T directly suspended, without a primary carrier
Acoustic enhancements as an option
The ceiling's waterproofing can be reinforced by using a silicone seal in the peripheral chamfers (visible) or in the strips (concealed) of the panels
Installation possible outdoors under certain conditions

Bulk cut

Dimensions in mm.

Downloadable documents

Choose the documents you want to download

Appearance

Perforations
Void percentage, hole shape in mm, and hole layout
- On steel: Non-Perforated, 11% Ø1.5 M, 22% Ø1.5 M, 12% Ø2.5 U, 16% Ø2.5 U, 23% Ø2.5 M, 46% 5.5x5.5 U*, 11% 61X4 U*; Other perforations available upon request
- On pre-coated aluminum: Non-Perforated, 11% Ø1.5 M, 10% Ø2.5 M, 12% Ø2.5 U, 23% Ø2.5 M
- On anodized aluminum: Non-Perforated, 11% Ø1.5 M
- On stainless steel: Non-Perforated, 10% Ø2.5 M, 16% Ø2.5 U
The cassettes have a non-perforated peripheral trim of a few mm
* Only available in 600x600 mm.

Perforation range:
Refer to the Perforations section of the "Metal Ceiling Finishes" page for more details.
11% Ø1.5 M
Void rate: 11%
Hole shape: Round Ø1.5
Hole arrangement: M

11% Ø1.5 M
Void rate: 11%
Hole shape: Round Ø1.5
Hole arrangement: M

10% Ø2.5 M
Void rate: 10%
Hole shape: Round Ø2.5
Hole arrangement: M

12% Ø2.5 U
Void rate: 12%
Hole shape: Round Ø2.5
Hole arrangement: U

16% Ø2.5 U
Void rate: 16%
Hole shape: Round Ø2.5
Hole layout: U

23% Ø2.5 M
Void rate: 23%
Hole shape: Round Ø2.5
Hole layout: M

46% Open cell ceiling with integrated T grid system
Void rate: 46%
Hole shape: Square 5.5X5.5
Hole arrangement: U

11% 61x4 U
Void rate: 11%
Hole shape: Rectangle 61x4
Hole arrangement: U
3D Mesh Viewer
Colors
Pre-coated polyester steel
- White 137 (≈ RAL 9003)
- Metallic Grey (RAL 9006)
Post-coated polyester powder steel
- White RAL 9003
- White RAL 9010
- White RAL 9016
- 180 RAL colors - on request
Available on request according to quantity
- High gloss Aluminum - Anodized
- Bright or brushed annealed Stainless Steel
Refer to the Materials and Finishes paragraph on the "Metal Ceiling Finishes" page for more details.
Pre-coated White 137
Material: Steel
Coating: 25 µm Polyester precoating
Color: White 137 (≈ RAL 9003)
Gloss: 15 UB ±5

Pre-coated
White 137
Material: Steel
Coating: 25 µm Polyester precoating
Color: White 137 (≈ RAL 9003)
Gloss: 15 UB ±5

Precoated
Grey 9006
Material: Steel
Coating: Precoated polyester 25 µm
Color: Metallic Grey RAL 9006
Gloss: 30 UB ±5

Post-laquered
White 9003
Material: Steel
Coating: Polyester powder post-painted 80 µm
Color: White RAL 9003
Gloss: 30 UB ±5

Postlacquered
White 9010
Material: Steel
Coating: 80 μm Polyester Powder Coated
Color: White RAL 9010
Gloss: 30 UB ±5

Post-painted
White 9016
Material: Steel
Coating: Post-painted polyester powder 80 µm
Color: White RAL 9016
Gloss: 30 UB ±5

Post-painted
180 RAL colors
Material: Steel
Coating: Powder-coated polyester post-painted 80 µm
Color: 180 RAL colors
Gloss level: 30 to 80 UB ±5

Anodized
High Gloss
Material: Aluminum
Treatment: Anodized
Finish: High gloss
(mirror finish)

Stainless Steel
Bright Annealed
Material: Stainless Steel
Finish: Bright Annealed
(mirror finish)

Stainless Steel
Brushed
Material: Stainless Steel
Finish: Brushed
3D Mesh Viewer

Performance

Light reflection
Up to 87%
Indoor air quality
Class A+ for all products:
- Unperforated
- From the ALPHA range
- From the ALPHA PLUS range, with specific bagged insulation
Sound absorption
According to EN ISO 11 654 standard:
- αw up to 0.80 (NRC = 0.80) with the ALPHA range
- αw up to 1 (NRC = 1) with the ALPHA PLUS range
Acoustic complement
- Offer ALPHA: Plafometal acoustic veil
- Offer ALPHA PLUS: Specific acoustic insulation packaged in a PE film
Refer to the Acoustic page in the Product Catalog annex for more details.
Wind resistance
Outdoor ceiling according to Eurocodes 0, 1, 3, and 9
- Contact us to determine the spacing to be provided based on the selected tile by indicating the degree of exposure to wind and corrosion according to the project implementation characteristics
- Refer to the installation instructions indicated on the product sheet Monobac
Also refer to the detailed recommendations in the "annexes" section of the Product Catalog, on page Implementation.
Corrosion resistance
Ceiling indoors
- Class B according to standard EN 13964
- Suspensions and fixings to supports must be selected according to the desired class
Ceiling outdoors
- Category C2 according to standard EN 12944
- Suspensions and fixings to supports must be selected according to the desired class
- In all cases, the ceiling must be sheltered from rain and runoff
Cleanability
By nature, our metal ceilings require minimal maintenance. However, various types of cleaning are still possible.
- Refer to the Maintenance page in the Product Catalog Annex for more details, including advanced high-pressure and dry steam cleaning.
- For perforated stainless steel ceilings, specific cleaning should be carried out on-site after the film removal. Refer to the "Protection Film" paragraph on the Implementation page in the Product Catalog Annex for more details.
Air permeability
Leakage rate in overpressure and underpressure according to standard EN ISO 9972: 2015PLAFOMETAL-SC-230 non-perforated system
- Q +/- 15 Pa ≈ 5 l/m2/s
- Q +/- 30 Pa ≈ 7 l/m2/s
- Q +/- 45 Pa ≈ 9 l/m2/s
- Q +/- 15 Pa ≈ 0.1 l/m2/s
- Q +/- 30 Pa ≈ 0.2 l/m2/s
- Q +/- 45 Pa ≈ 0.3 l/m2/s
- Q +/- 15 Pa ≈ 0.004 l/m2/s
- Q +/- 30 Pa ≈ 0.009 l/m2/s
- Q +/- 45 Pa ≈ 0.013 l/m2/s
Reservations, integrations
Custom factory cutting available upon request.
Opening
Access to the plenum by unclipping the panel from the bottom using a specific removal tool.
It is possible to make the ceiling non-removable by adding a safety bracket at each corner of the tile.
Resistance to disinfection chemicals
Our metal ceilings are resistant to sodium hypochlorite 2.5%, hydrogen peroxide 6%, or ethanol 70% disinfectants (following EN 12720 and ISO 11998 standards).

Please refer to the page Maintenance in the Product Catalog Annexes for more details.
FDES Plafometal verified
Verified EPD available on the INIES database (www.inies.fr) and directly accessible on our website at this link
Reaction to fire
Euroclass A1 for products:- Unperforated precoated panels- Precoated panels from the ALPHA rangeEuroclass A2-s1, d0 for products:- Non-perforated powder post-coated panels- Powder post-coated panels from the ALPHA range- From the ALPHA PLUS range