Mouse over the image to zoom and use the wheel to adjust the zoom level
PLAFOMETAL-CC-110

Swing-down ceiling on concealed profile with Orial panel

Ideal for :

office and hospital corridors

PLAFOMETAL-CC-110 is a system adjustable to the dimensions of corridors. The ORIAL panels are self-supporting from wall to wall, avoiding the use of suspended structures in cluttered plenums with numerous distribution networks. They create an elegant recessed joint with the wall. Their durability combined with a large opening by swinging down on both sides will facilitate maintenance phases throughout the building's lifespan.

Selection guide

  • Acoustic comfort

The advantages of the system

  • Aesthetic: hidden frame with offset edge and hollow joint to absorb wall alignment variations for a perfectly straight finish
  • Acoustic: high correction, absorption coefficient αw up to 1 (NRC = 1)
  • Opening: swing-down on both sides from below, ideal for crowded plenums
  • Plenum ventilation: open hollow joint suitable for hospital environments

Description

  • Swing-down opening ceiling composed of panels hooked on a concealed profile creating an open gap joint between the ends of the panels and the wall
  • Self-supporting steel panels with tight edges and sharp angles
  • The panels are equipped with notches at their ends for suspension on the framework and swinging to one side or the other
  • The concealed profile consists of a fixing section to be attached to the wall and a hooking profile to be shifted and fixed under the wing of the fixing section according to the length of the panel between notches. It allows the open gap joint thus formed to absorb alignment discrepancies with the wall
  • Acoustic enhancements as an option

Bulk cut

A gap A is required between the panel and the wall. Dimensions in mm.

Downloadable documents

Choose the documents you want to download

Appearance

  • Perforations

    Void percentage, hole shape in mm, and hole distribution

    • On steel: Non-Perforated, 11% Ø1.5 M, 22% Ø1.5 M, 10% Ø2.5 M, 12% Ø2.5 U*, 16% Ø2.5 U*, 23% Ø2.5 M, 20% 61x4 U*, 40% 61x4 U*, 18% ØIRR; Possibility to stop perforation at the end of the panel (except 18%IRR); Other perforations available on request
    • On stainless steel: Non-Perforated, 10% Ø2.5 M, 16% Ø2.5 U*

    *Available only with perforation stop on 4 sides

    Perforation range:

    Refer to the Perforations paragraph on the "Metal Ceiling Finishes" page for more details.

    11% Ø1.5 M
    11% Ø1.5 M
    Void rate: 11%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    11% Ø1.5 M
    11% Ø1.5 M
    Void rate: 11%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    22% Ø1.5 M
    22% Ø1.5 M
    Void rate: 22%
    Hole shape: Round Ø1.5
    Hole arrangement: M
    10% Ø2.5 M
    10% Ø2.5 M
    Void rate: 10%
    Hole shape: Round Ø2.5
    Hole arrangement: M
    12% Ø2.5 U
    12% Ø2.5 U
    Void rate: 12%
    Hole shape: Round Ø2.5
    Hole arrangement: U
    16% Ø2.5 U
    16% Ø2.5 U
    Void rate: 16%
    Hole shape: Round Ø2.5
    Hole layout: U
    23% Ø2.5 M
    23% Ø2.5 M
    Void rate: 23%
    Hole shape: Round Ø2.5
    Hole layout: M
    20% 61x4 U
    20% 61x4 U
    Void rate: 20%
    Hole shape: Rectangle 61x4
    Hole arrangement: U
    40% 61x4 U
    40% 61x4 U
    Void rate: 40%
    Hole shape: Rectangle 61x4
    Hole arrangement: U
    18% IRR
    18% IRR
    Void rate: 18%
    Hole shape: Round Ø4 and 6.4
    Hole layout: Irregular

  • Colors

    Precoated polyester steel

    • White 137 (≈ RAL 9003)

    Post-coated polyester powder steel

    • White RAL 9003
    • White RAL 9010
    • White RAL 9016
    • 180 RAL colors - upon request

    Available on request depending on quantity

    • Bright or brushed annealed stainless steel

    Refer to the section Materials and Coatings on the page "Metal Ceiling Finishes" for more details.

    Pre-coated <br>White 137
    Pre-coated White 137
    Material: Steel
    Coating: 25 µm Polyester precoating
    Color: White 137 (≈ RAL 9003)
    Gloss: 15 UB ±5
    Pre-coated <br>White 137
    Pre-coated
    White 137
    Material: Steel
    Coating: 25 µm Polyester precoating
    Color: White 137 (≈ RAL 9003)
    Gloss: 15 UB ±5
    Post-laquered <br>White 9003
    Post-laquered
    White 9003
    Material: Steel
    Coating: Polyester powder post-painted 80 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Postlacquered <br>White 9010
    Postlacquered
    White 9010
    Material: Steel
    Coating: 80 μm Polyester Powder Coated
    Color: White RAL 9010
    Gloss: 30 UB ±5
    Post-painted <br>White 9016
    Post-painted
    White 9016
    Material: Steel
    Coating: Post-painted polyester powder 80 µm
    Color: White RAL 9016
    Gloss: 30 UB ±5
    Post-painted <br>180 RAL colors
    Post-painted
    180 RAL colors
    Material: Steel
    Coating: Powder-coated polyester post-painted 80 µm
    Color: 180 RAL colors
    Gloss level: 30 to 80 UB ±5
    Stainless Steel <br>Bright Annealed
    Stainless Steel
    Bright Annealed
    Material: Stainless Steel
    Finish: Bright Annealed
    (mirror finish)
    Stainless Steel <br>Brushed
    Stainless Steel
    Brushed
    Material: Stainless Steel
    Finish: Brushed

Performance

  • Light reflection

    Up to 87%

  • Indoor air quality

    Class A+ for all products:

    • Non-perforated
    • From the ALPHA range
    • From the ALPHA PLUS range, with specific bagged insulation

    Class A for all products from the ALPHA PLUS range, with specific surfaced insulation

  • Sound absorption

    According to EN ISO 11654

    • αw up to 0.85 (NRC = 0.85) with the ALPHA range
    • αw up to 1 (NRC = 1) with the ALPHA PLUS range

    Acoustic performances subject to the selected perforation. Refer to the table in the brochure Acoustic metal ceilings.

  • Acoustic complement

    • Offer ALPHA: Plafometal acoustic veil
    • Offer ALPHA PLUS: specific acoustic insulation with a facing veil or encapsulated in a PE film

    Refer to the Acoustic page in the Product Catalog appendices for more details.

  • Corrosion resistance

    Ceiling indoors

    • Class B according to standard EN 13964
    • Suspensions and fixings to supports are to be selected according to the targeted class

    Refer to the page Implementation in the Product Catalog appendix for more details.

  • Cleanability

    By nature, our metal ceilings require very little maintenance. However, various types of cleaning are possible:

  • Reservations, integrations

    Customized factory cutting available upon request.

  • Opening

    Access to the plenum by vertical push of the panel then lateral translation to escape the hooking profile. The panel tilts and remains suspended on the opposite profile.

  • Resistance to disinfection chemicals

    Our metal ceilings are resistant to 2.5% sodium hypochlorite, 6% hydrogen peroxide, or 70% ethanol disinfectants (according to EN 12720 and ISO 11998 standards).

    Refer to the Maintenance page in the Product Catalog annex for more details.

  • FDES Plafometal verified

    Verified EPDs available on the INIES database (www.inies.fr) and directly accessible on our website at this link

  • Reaction to fire

    Euroclass A1 for products:

    • Non-perforated pre-coated products
    • Pre-coated products from the ALPHA range

      • Euroclass A2-s1, d0 for products:

    • Non-perforated powder post-coated products
    • Powder post-coated products from the ALPHA range
    • From the ALPHA PLUS range

Technical properties

General presentation of the system family

Family : Plafonds autoportants pour les circulations

Ideal for office corridors, hospitals...

Acoustic:

  • Acoustic comfort with an absorption index αw up to 1.00 (NRC = 1.00)

Aesthetic:

  • Adaptable to corridor width
  • Various finishes with concealed joints according to the systems
  • Possibility to integrate equipment
  • Customized light recesses and troughs

Practical:

  • Self-supporting from wall to wall, avoiding suspended frameworks in crowded plenums
  • Easy installation and opening
  • Wide access to the plenum
  • Robustness during handling

Sub-family : Plafond ouvrant sur profils de rives cachés

Swing-down systems with ORIAL PLAFOMETAL panels

  • Hollow joint absorbing alignment deviations with the wall
  • Swinging down on both sides from below for tight plenums
  • Ventilation possible through the hollow joint for healthcare facilities
  • Extra-large (XL) and Fire-Resistant (SF) versions for High-Rise Buildings

The products making up this system

Orial Plafometal

Swing-down opening panel from both sides, concealed grid

Discover