Open linear ceiling with Vertical strip Type V
shopping mallsPLAFOMETAL-LC-140 is a ceiling cladding system with a linear appearance. The vertical strips Type V with a significant open spacing between strips conceal the plenum in an indirect view while maintaining a sense of space and light. The substantial void percentage is suitable for active fire protection systems positioned in the plenum. Available in various heights, this system can also be installed outdoors.
Selection guide
- Outdoor installation
- Active fire protection
The advantages of the system
- Aesthetics: conceals the plenum in indirect view while maintaining a sense of space and light
- Safety: significant open area for active fire protection systems
- Dimension: various heights available and significant lengths possible
- Installation: easy to install. Suitable for outdoor installation. Removable if necessary.
Description
- Open linear ceiling made up of clipped strips on a semi-concealed carrier with notches
- The aluminum strip is vertical. It is available in different heights in long lengths
- Alignment of the carrier notches allows for an open interval between strips of 100, 150, or 200 mm equal to its height
- Installation possible outdoors under certain conditions
Bulk cut
Carrier at intervals of 100, 150 or 200. Dimensions in mm.
Downloadable documents
Appearance
-
Colors
Pre-painted polyester aluminium
- Standard White double-sided (RAL 9003)
- Metallic Grey double-sided (RAL 9006)
Refer to the paragraph Materials and Coatings on the "Metal Ceiling Finishes" page for more details. [/goaland_text_to_translate]
Precoated White 9003Material: Aluminum
Coating: Precoated polyester 18 µm
Color: White RAL 9003
Gloss: 30 UB ±5
Precoated
White 9003Material: Aluminum
Coating: Precoated polyester 18 µm
Color: White RAL 9003
Gloss: 30 UB ±5
Pre-painted
Grey 9006Material: Aluminum
Coating: Precoated polyester 18 μm
Color: Metallic Grey RAL 9006
Gloss: 30 UB ±5
Performance
-
Light reflection
Up to 87%
-
Indoor air quality
Class A+
-
Wind resistance
Outdoor ceiling according to Eurocodes 0, 1, 3, and 9
- Please contact us to determine the spacings to be provided according to the selected strip, indicating the degree of exposure to wind and corrosion based on the project's implantation characteristics.
- Refer to the implementation instructions indicated on the product sheet Vertical Strip Type V
Also refer to the detailed recommendations in the "annexes" of the Product Catalog, on page Implementation.
-
Corrosion resistance
Ceiling indoors
- Class C according to the EN 13964 standard
- Suspensions and fixings to the supports must be selected according to the intended class
Ceiling outdoors
- Category C3 for steel carriers according to the EN 12944 standard
- Category 3a for blades and aluminum carriers according to the EN 1396 standard
- Suspensions and fixings to the supports must be selected according to the intended class
- In all cases, the ceiling must be protected from rain and runoff
Refer to the page Installation in the Product Catalog Annexes for more details.
-
Cleanability
By nature, our metal ceilings require little maintenance. However, different types of cleaning are possible. Please refer to the page Maintenance in the Product Catalog Appendices for more details.
-
Reservations, integrations
N/A
-
Opening
Unclipping each strip by releasing them from the carrier tabs.
-
Resistance to disinfection chemicals
Our metal ceilings are resistant to 2.5% sodium hypochlorite, 6% hydrogen peroxide, or 70% ethanol disinfectants (according to EN 12720 and ISO 11998 standards).Refer to the Maintenance page in the Product Catalog annex for more details.
-
Active fire protection
According to standard EN 12845
- If sprinklers are installed above the open cell suspended ceiling, the total open flat surface of the ceiling, including lighting fixtures, must not be less than 70% of the flat surface
- In practice, a void percentage greater than 80% is commonly requested for ceiling elements
Ceiling void percentage
- Maximum recommended interval equal to the blade height
- Greater than 80% starting from the 100 mm interval
-
Reaction to fire
Euroclass A1
Technical properties
General presentation of the system family
Family : Plafonds linéaires
Ideal for reception halls, exterior soffits ...
Aesthetic:
- Ceiling cladding
- Customized linear appearance through variable widths, heights, and intervals
- Possibility of significant lengths
- Wide range of available finishes
Practical:
- Easy to install
- Partially removable
- Suitable for outdoor installation under certain conditions
Sub-family : Lame clippée
Linear ceiling open or closed with clipped stripLinear systems with Type R, Type U, Type F, Type V strips- Wide aesthetic selection: colors, edge finishes (round, straight, closed, vertical)- Various module dimensions (widths, heights), which can be combined (multi-linear)- Long lengths