Mouse over the image to zoom and use the wheel to adjust the zoom level
PLAFOMETAL-LC-110

Linear strip Type R with round edges on semi-concealed grid

Ideal for :

the reception hallsPLAFOMETAL-LC-110 is a linear ceiling cladding system. The Type R rounded edge strips with an open gap between strips provide a softened directional look. Available in a wide range of colors, this system can also be used outdoors.

Selection guide

  • Outdoor installation

The advantages of the system

  • Aesthetic: 15 or 5 mm gap between strips with a softened directional aspect due to their rounded edges. Numerous colors
  • Dimension: possibility of significant lengths
  • Installation: easy to install. Can be installed outdoors. Removable occasionally

Description


  • Open linear ceiling made up of clipped strips on semi-concealed carriers with notches
  • The aluminum strip is narrow with rounded edges and available in large lengths
  • The alignment of the carrier notches allows for an open gap between strips of 15 or 5 mm
  • Black interstrip profiles allow for a closed hollow joint with certain gaps
  • Installation possible outdoors under certain conditions

Bulk cut

Carrier at 5 or 15 intervals. Dimensions in mm.

Downloadable documents

Choose the documents you want to download

Appearance

  • Perforations

    • Possible perforations, contact us.

    Attention: perforations are not compatible with industrial atmospheres and coastal areas.

  • Colors

    Pre-painted polyester aluminium

    • Standard White (RAL 9003)
    • Metallic Grey (RAL 9006)
    • Other colors according to the color chart (also shown here)

    Pre-painted polyurethane polyamide aluminium*

    • Textured Grained White (RAL 9003)
    • Textured Grained Grey (RAL 9006)

    Available on request depending on quantity

    • Aluminium in other shades, wood imitation - Pre-painted polyester
    • High gloss aluminium - Anodized

    *Recommended for outdoor use, but not suitable for industrial environments and coastal areas.

    Refer to the paragraph Materials and Coatings on the "Metal Ceiling Finishes" page for more details.

    Precoated <br>White 9003
    Precoated White 9003
    Material: Aluminum
    Coating: Precoated polyester 18 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Precoated <br>White 9003
    Precoated
    White 9003
    Material: Aluminum
    Coating: Precoated polyester 18 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Pre-painted <br>Grey 9006
    Pre-painted
    Grey 9006
    Material: Aluminum
    Coating: Precoated polyester 18 μm
    Color: Metallic Grey RAL 9006
    Gloss: 30 UB ±5
    Precoated <br>White RAL 9010
    Precoated
    White RAL 9010
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: White RAL 9010
    Gloss: 30 UB ±5
    Pre-painted <br> Ivory 1015
    Pre-painted
    Ivory 1015
    Material: Aluminum
    Coating: Pre-coated polyester 18 µm
    Color: Ivory RAL 1015
    Gloss: 20 UB ±5
    Prepainted <br>Sepia Brown 8014
    Prepainted
    Sepia Brown 8014
    Material: Aluminum
    Coating: 18 µm Polyester precoated
    Color: Sepia Brown RAL 8014
    Gloss: 20 UB ±5
    Pre-painted <br>Pearl grey 7035
    Pre-painted
    Pearl grey 7035
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Pearl gray RAL 7035
    Gloss: 20 UB ±5
    Pre-painted <br>Slate Grey 7015
    Pre-painted
    Slate Grey 7015
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Slate Grey RAL 7015
    Gloss: 20 UB ±5
    Precoated <br> Dark Black 9005
    Precoated
    Dark Black 9005
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Dark black RAL 9005
    Gloss: 20 UB ±5
    Precoated <br>Grained White 9003
    Precoated
    Grained White 9003
    Material: Aluminum
    Coating: Precoated polyurethane-polyamide 24 µm
    Color: White Textured RAL 9003
    Gloss: 30 UB ±5
    Precoated <br>Grained Grey 9006
    Precoated
    Grained Grey 9006
    Material: Aluminum
    Coating: Precoated polyurethane-polyamide 22 µm
    Color: Grained Metallic Grey RAL 9006
    Gloss: 30 UB ±5
    Pre-painted <br>Natural Oak
    Pre-painted
    Natural Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 μm
    Appearance: Natural Oak
    (wood imitation F04500)
    Pre-painted <br>Golden Oak
    Pre-painted
    Golden Oak
    Material: Aluminum
    Coating: 27 µm Pre-painted polyester
    Finish: Golden Oak
    (wood imitation F03030)
    Pre-painted <br>Ashen Oak
    Pre-painted
    Ashen Oak
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Appearance: Ash Oak
    (wood imitation F03420)
    Pre-painted <br>Whitened Oak
    Pre-painted
    Whitened Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Bleached oak
    (wood imitation F02340)
    Prepainted <br>Dark Oak
    Prepainted
    Dark Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark Oak
    (wood imitation F05090)
    Precoated <br>Honey Oak
    Precoated
    Honey Oak
    Material: Aluminium
    Coating: Precoated polyester 27 µm
    Appearance: Honey oak
    (wood imitation F03330)
    Prélaqué <br>Teck doré
    Prélaqué
    Teck doré
    Matière : Aluminium
    Revêtement : Prélaqué polyester 27 µm
    Aspect : Teck doré
    (imitation bois F04670)
    Pre-painted <br> Mahogany
    Pre-painted
    Mahogany
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Mahogany
    (wood imitation F05630)
    Pre-painted <br>Cherry Wood
    Pre-painted
    Cherry Wood
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Cherry
    (wood imitation F03150)
    Pre-painted <br> Dark Cherry Wood
    Pre-painted
    Dark Cherry Wood
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Dark cherry
    (wood imitation F02010)
    Pre-painted <br>Dark walnut
    Pre-painted
    Dark walnut
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark walnut
    (wood imitation F05680)
    Pre-painted <br>Dark Wenge
    Pre-painted
    Dark Wenge
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Wenge
    (wood imitation F04660)
    Precoated <br>Dark Ebony
    Precoated
    Dark Ebony
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Ebony
    (wood imitation F04220)
    Anodized <br>High Gloss
    Anodized
    High Gloss
    Material: Aluminum
    Treatment: Anodized
    Finish: High gloss
    (mirror finish)

Performance

  • Light reflection

    Up to 87%

  • Indoor air quality

    Class A+

  • Wind resistance

    Exterior ceiling according to Eurocodes 0, 1, 3, and 9

    • Contact us to determine the spacings to be planned according to the selected strip by indicating the degree of wind and corrosion exposure based on the characteristics of the project's layout.
    • Refer to the installation instructions indicated on the product sheet Type R Strip

    Also refer to the detailed recommendations in the "annexes" of the Product Catalog, on the page Installation.

  • Corrosion resistance

    Ceiling indoors

    • Class C according to standard EN 13964
    • Suspensions and fixing to supports are to be selected according to the desired class

    Ceiling outdoors

    • Category C3 for steel carriers according to standard EN 12944
    • Category 3a for strips and aluminum carriers according to standard EN 1396
    • Suspensions and fixing to supports are to be selected according to the desired class
    • In all cases, the ceiling must be protected from rain and runoff

    Refer to the page Installation in the Product Catalog Appendices for more details.

  • Cleanability

    By nature, our metal ceilings require little maintenance. However, various types of cleaning are possible. Refer to the Maintenance page in the Product Catalog annexes for more details.

  • Reservations, integrations

    On-site cutting. Specific covers for lights, sprinklers, or other fixtures on one or several linear strip modules are available upon request.

  • Opening

    Unclipping each strip by releasing them from the carriers' tabs.

  • Resistance to disinfection chemicals

    Our metal ceilings are resistant to 2.5% sodium hypochlorite, 6% hydrogen peroxide, or 70% ethanol disinfectants (according to EN 12720 and ISO 11998 standards).Refer to the Maintenance page in the Product Catalog Annex for more details.

  • Reaction to fire

    Euroclass A1

Technical properties

General presentation of the system family

Family : Plafonds linéaires

Ideal for reception areas, exterior soffits...

Aesthetic:

  • Ceiling cladding
  • Custom linear appearance with varying widths, heights, and intervals
  • Possibility of significant lengths
  • Numerous available finishes

Practical:

  • Easy to install
  • Occasionally removable
  • Suitable for outdoor installation under certain conditions

Sub-family : Lame clippée

Linear ceiling with open or closed clipped strip

Linear systems with Type R, Type U, Type F, Type V strips

  • Wide range of aesthetics: colors, edge finishes (round, straight, closed, vertical)
  • Different module dimensions (widths, heights), that can be combined (multi-linear)
  • Great lengths

The products making up this system

Linear Strip Type R

Linear strip with round edges

Discover