Mouse over the image to zoom and use the wheel to adjust the zoom level
PLAFOMETAL-LC-130

Closed linear ceiling with Straight-Edged Type F Strip

Ideal for :

The reception halls and exterior soffitsPLAFOMETAL-LC-130 is a linear ceiling cladding system. The Type F overlapping strips with a closed gap between strips provide a directional and graphic aspect. Available in various widths and a wide range of colors, this system can also be used outdoors.

Selection guide

  • Outdoor installation

The advantages of the system

  • Aesthetics: closed 15 mm hollow joint between strips overlapping for a directional and graphic appearance. Available in numerous colors.
  • Dimension: various widths available and significant lengths possible
  • Installation: easy to install. Suitable for outdoor installation

Description


  • Closed linear ceiling composed of clipped strips on a concealed carrier with notches
  • The aluminum strip has straight edges and sharp angles with a part overlapping the adjacent strip, forming a closed hollow joint between strips. It is available in various widths in large lengths
  • The alignment of the carrier notches allows for a closed interval between strips of 15 mm
  • Possible installation outdoors under certain conditions

Bulk cut

Carrier at 15 cm intervals. Dimensions in mm.

Downloadable documents

Choose the documents you want to download

Appearance

  • Perforations

    • Possible perforations, contact us.

    Attention: perforations are not compatible with industrial atmospheres and coastal areas.

  • Colors

    Precoated polyester Aluminium

    • Standard White (RAL 9003)
    • Metallic Grey (RAL 9006)
    • Other colors according to color chart (also shown here)

    Precoated polyurethane polyamide Aluminium*

    • Textured White (RAL 9003)
    • Textured Grey (RAL 9006)

    Available upon request, depending on quantity

    • Aluminium in other shades, wood imitation - Precoated polyester
    • High gloss Aluminium - Anodized

    *Recommended for outdoor use but not compatible with industrial atmospheres and coastal areas.

    Refer to the paragraph Materials and coatings on the "Metal ceiling finishes" page for more details.

    Precoated <br>White 9003
    Precoated White 9003
    Material: Aluminum
    Coating: Precoated polyester 18 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Precoated <br>White 9003
    Precoated
    White 9003
    Material: Aluminum
    Coating: Precoated polyester 18 µm
    Color: White RAL 9003
    Gloss: 30 UB ±5
    Pre-painted <br>Grey 9006
    Pre-painted
    Grey 9006
    Material: Aluminum
    Coating: Precoated polyester 18 μm
    Color: Metallic Grey RAL 9006
    Gloss: 30 UB ±5
    Precoated <br>White RAL 9010
    Precoated
    White RAL 9010
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: White RAL 9010
    Gloss: 30 UB ±5
    Pre-painted <br> Ivory 1015
    Pre-painted
    Ivory 1015
    Material: Aluminum
    Coating: Pre-coated polyester 18 µm
    Color: Ivory RAL 1015
    Gloss: 20 UB ±5
    Prepainted <br>Sepia Brown 8014
    Prepainted
    Sepia Brown 8014
    Material: Aluminum
    Coating: 18 µm Polyester precoated
    Color: Sepia Brown RAL 8014
    Gloss: 20 UB ±5
    Pre-painted <br>Pearl grey 7035
    Pre-painted
    Pearl grey 7035
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Pearl gray RAL 7035
    Gloss: 20 UB ±5
    Pre-painted <br>Slate Grey 7015
    Pre-painted
    Slate Grey 7015
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Slate Grey RAL 7015
    Gloss: 20 UB ±5
    Precoated <br> Dark Black 9005
    Precoated
    Dark Black 9005
    Material: Aluminum
    Coating: Pre-painted polyester 18 µm
    Color: Dark black RAL 9005
    Gloss: 20 UB ±5
    Precoated <br>Grained White 9003
    Precoated
    Grained White 9003
    Material: Aluminum
    Coating: Precoated polyurethane-polyamide 24 µm
    Color: White Textured RAL 9003
    Gloss: 30 UB ±5
    Precoated <br>Grained Grey 9006
    Precoated
    Grained Grey 9006
    Material: Aluminum
    Coating: Precoated polyurethane-polyamide 22 µm
    Color: Grained Metallic Grey RAL 9006
    Gloss: 30 UB ±5
    Pre-painted <br>Natural Oak
    Pre-painted
    Natural Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 μm
    Appearance: Natural Oak
    (wood imitation F04500)
    Pre-painted <br>Golden Oak
    Pre-painted
    Golden Oak
    Material: Aluminum
    Coating: 27 µm Pre-painted polyester
    Finish: Golden Oak
    (wood imitation F03030)
    Pre-painted <br>Ashen Oak
    Pre-painted
    Ashen Oak
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Appearance: Ash Oak
    (wood imitation F03420)
    Pre-painted <br>Whitened Oak
    Pre-painted
    Whitened Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Bleached oak
    (wood imitation F02340)
    Prepainted <br>Dark Oak
    Prepainted
    Dark Oak
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark Oak
    (wood imitation F05090)
    Precoated <br>Honey Oak
    Precoated
    Honey Oak
    Material: Aluminium
    Coating: Precoated polyester 27 µm
    Appearance: Honey oak
    (wood imitation F03330)
    Prélaqué <br>Teck doré
    Prélaqué
    Teck doré
    Matière : Aluminium
    Revêtement : Prélaqué polyester 27 µm
    Aspect : Teck doré
    (imitation bois F04670)
    Pre-painted <br> Mahogany
    Pre-painted
    Mahogany
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Mahogany
    (wood imitation F05630)
    Pre-painted <br>Cherry Wood
    Pre-painted
    Cherry Wood
    Material: Aluminum
    Coating: Precoated polyester 27 µm
    Finish: Cherry
    (wood imitation F03150)
    Pre-painted <br> Dark Cherry Wood
    Pre-painted
    Dark Cherry Wood
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Appearance: Dark cherry
    (wood imitation F02010)
    Pre-painted <br>Dark walnut
    Pre-painted
    Dark walnut
    Material: Aluminum
    Coating: Pre-painted polyester 27 µm
    Finish: Dark walnut
    (wood imitation F05680)
    Pre-painted <br>Dark Wenge
    Pre-painted
    Dark Wenge
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Wenge
    (wood imitation F04660)
    Precoated <br>Dark Ebony
    Precoated
    Dark Ebony
    Material: Aluminum
    Coating: Pre-coated polyester 27 µm
    Appearance: Dark Ebony
    (wood imitation F04220)
    Anodized <br>High Gloss
    Anodized
    High Gloss
    Material: Aluminum
    Treatment: Anodized
    Finish: High gloss
    (mirror finish)

Performance

  • Light reflection

    Up to 87%

  • Indoor air quality

    Class A+

  • Wind resistance

    Outdoor ceiling according to Eurocodes 0, 1, 3, and 9

    • Please contact us to determine the spacing required based on the selected strip by indicating the wind and corrosion exposure level according to the project's implementation characteristics
    • Refer to the installation instructions provided on the product sheet Type F Strip

    Also, refer to the detailed recommendations in the "annexes" of the Product Catalog, on page Installation.

  • Corrosion resistance

    Ceiling indoors

    • Class C according to EN 13964 standard
    • Suspensions and fixings to supports must be selected according to the desired class

    Ceiling outdoors

    • Category C3 for steel carriers according to EN 12944 standard
    • Category 3a for slats and aluminum carriers according to EN 1396 standard
    • Suspensions and fixings to supports must be selected according to the desired class
    • In all cases, the ceiling must be sheltered from rain and runoff

    Refer to the page Installation in the Product Catalog Annex for more details.

  • Cleanability

    By nature, our metal ceilings require little maintenance. However, different types of cleaning are still possible. Refer to the page Maintenance in the Product Catalog Appendices for more details.

  • Reservations, integrations

    On-site cutting. Specific covers for spotlights, sprinklers, or other elements on one or multiple linear strip modules are available upon request.

  • Opening

    Non-demountable ceiling punctually.

  • Resistance to disinfection chemicals

    Our metal ceilings are resistant to 2.5% sodium hypochlorite disinfectants, 6% hydrogen peroxide, or 70% ethanol (according to EN 12720 and ISO 11998 standards).Refer to the page Maintenance in the Product Catalog Appendices for more details.

  • Reaction to fire

    Euroclass A1

Technical properties

General presentation of the system family

Family : Plafonds linéaires

Ideal for reception halls, external soffits ...

Aesthetic:

  • Ceiling cladding
  • Custom linear appearance achieved by varying widths, heights, and intervals
  • Possibility of significant lengths
  • Wide range of available finishes

Practical:

  • Easy to install
  • Removable for occasional maintenance
  • Suitable for outdoor installation under certain conditions

Sub-family : Lame clippée

Linear ceiling open or closed with clipped stripLinear systems with Type R, Type U, Type F, Type V strips- Wide range of aesthetics: colors, edge finishes (round, straight, closed, vertical)- Various module dimensions (widths, heights), which can be combined (multi-linear)- Long lengths

The products making up this system

Linear Strip Type F

Linear strip with straight edges forming a closed hollow joint

Discover